A Tuna

thingiverse

### Update (1/8/2019) Fixed `head.stl` (again) to make it solid. Fixed `head.stl` and `feet_R.stl`. The head was the wrong messed up STL while the right feet was too small. ### Description This is scaled 1:1. I printed this on an AnyCubic Photon. The parts are sliced such that they would fit on the build plate. They are also sliced so that it is posable. In fact, some of the larger parts _just_ fit on a single build plate. (Like `chest_T` and `pomd_F` and `pomd_b`. I used a mixture of AnyCubic Green and Grey, both at 0.05 and 0.04 respectively. There's probably no need to use a higher resolution. I mostly used up to 90% medium supports, though I had to use _heavy_ supports for the feet. ### Naming Convention Parts are named `<part_name>` with optional `xN`, where `N` is a number. So `vents_x4` means that you would need _four_ copies. Some of the parts are also prefixed with `T` for _top_, `B` for _bottom_ or _back_, `F` for _front_, and `M` for _middle_. ### Parts to Hollow Out: These are the parts that I've hollowed out: * `chest_T` * `chest_B` * `flank_L` * `flank_R` * `waist` * `back` * `pomd_B` * `crotch_B` In particular, I left the legs, calves, and feet _un_-hollowed so that it provides for a heavier base. The amount of resin I've used is slightly less that __1300 ml__. ### Magnetizing The `shoulders_(L|R),` and `flank_(L|R)`, `ion_B` amd `fuserad_B` have magnet slots. The magnets I've used are 13mm in width. You would need a minimum of 8. But I'd suggest getting extras. ### Putting Everything Together Search through the images for the exploded parts to see how everything fits. It shouldn't be too hard. I've used hot-melt glue to put the parts together. ### Credits Thanks to EvaNoGainen, karkinos and Orion_RS for the pictures and help. <3<3<3. This took me almost 2 months to complete. I hope you enjoy the model! If you want to show your appreciation, tipping is always welcomed. My kids can get more books. :D