A-Z Cryptex with 'clicking' haptic feedback

thingiverse

A (customizable) cryptex I designed. I mainly invested quite some time in creating haptic feedback of the rings. Simply print top_ring, bottom_ring, one of the available bases (4,5,6,7 letters), all letters you need and the same amount of internal rings. Use some super glue to attach the separate parts. Edit: as Jaybob08 suggested, it's also possible to melt the parts together. Use a soldering iron to melt the edges together! Edit: as suggested by Guyjantic, you can apply lube to the parts that don't need to be glued, to avoid accidentally gluing them together. Edit: Instructions for gluing: 1. Take the bottom ring (bottom_ring.stl) 2. Glue one of the internal rings (internal_ring.stl) to the bottom ring. Make sure that the notches of both rings are aligned. 3. Place the outer ring, belonging to the last letter of your keyword to the internal ring of step 2. 4. Take a new internal ring and glue this one to the internal ring of step 2 in such a way that the internal rings are glued together, but the outer ring can rotate freely. 5. Repeat step 3 and 4 until you have placed all internal rings and outer rings. 6. Glue the top ring (top_ring.stl) to the final internal ring. Note: Be careful with gluing, you absolutely want to avoid gluing any of the outer rings. This results in a non-functioning cryptex. Happy printing, and if you have any feedback, please leave a comment! https://youtu.be/LzMk6WDCU5o