Abstract Vase

prusaprinters

<p>Let me present you my new abstract vase. I designed it to be satisfying to look at, have a nice reflections in sun and to be easy to print.</p> <p>I take about 2 and half hour to print it with 0.4 mm noozle and 0.2 mm layer height.</p> <p>Feel free to print it with other materials and don't forget to share your results :)</p> <p>PLA Verigo Grey, Rapunzel Silver and Gold Happens by Fillamentum.<br/> CPE HG100 Deep Sea Transparent and Neon Yellow Transparent by Fillamentum and PETG Transparent Green by PM</p> <p>Enjoy it!</p> <h3>Print instructions</h3><h3>Category: Decor Print Settings</h3> <p><strong>Printer:</strong> Rebel II</p> <p><strong>Rafts:</strong> Doesn't Matter</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.2 mm</p> <p><strong>Infill:</strong> Vase mode</p> <p><strong>Notes:</strong></p> <p>I used Simplify 3D with vase mode. Feel free to use any other slicer.</p> <p>Material flow set to 105% for better layer adhesion. For PLA object fan set to 50% and for CPE set to 15%. And 3 bottom layers. It'll give you sealed bottom of the vase and better layer adhesion for watertight vase without any postproduction needed. Tested with all my printed vases and all of them can handle water without leaking.</p>