AD584 voltage reference enclosure

prusaprinters

<p>Simple enclosure to protect the battery pins from short circuit.<br/> The jumpers, switch and contacts are still accessible.<br/> The enclosure provides a stable mount.</p> <p>Due to the hole in the back, it is still very easy to replace the battery (or simply remove it).</p> <p>There are 2 models included with different mounting options:</p> <ul> <li>4.5 mm hole for M3 brass inserts</li> <li>2 mm hole for self tapping screw</li> </ul> <p>The edges are chamfered to make it a bit more practical to hold and handle.</p> <p>The board can be slided in the holder, even with the battery inserted.<br/> Fixating the board with mounting screws is optional as with my print the tolerances were already low enough to hold the board in place.</p> <h3>Print instructions</h3><p>Designed to be printed "standing" without the need for support.<br/> The edges which would normally have an overhanging edge, are reinforced internally with a tilted edge so no support is needed.</p> <p>When using PrusaSlicer, it is adviced to use variable layer height to improve the readability of the embossed letters while still have a decent printing time.</p>