Adafruit Ultimate GPS Case

thingiverse

There are two versions here: * *Ultimate GPS Top.stl* This is just a top to the base at https://www.thingiverse.com/thing:4825513 and requires 4 M2.5 screws (approx 10 or 11mm long) and nuts to close * *Ultimate GPS Top 2.stl* and *Ultimate GPS Bottom* This is a case that snaps together (pictured) and has been deepened to include space for attaching the CR1220 battery clip on the bottom. I may ultimately add a hole for the external antenna, but don't need one at present, so who knows. I've only tested this with the USB-C version of the device currently sold at Adafruit (https://www.adafruit.com/product/4279), so I don't know if the size is right for earlier versions or not. The first case was an initial proof of concept and is included in case anyone wants to use it. The second (two part) case is what I'm using, and it snaps together pretty easily... put the GPS into the top piece upside down, sliding the USB C port through the opening, then push the bottom piece with the open end under the USB plug into the top and snap it together -- because the walls of the bottom piece fit between the stands and the outer walls of the top piece, it might be a tight fit initially, but it works well for me, so I'm happy with it. I considered adding flanges on the sides of the top and depressions for them to snap into on the bottom walls, but the friction fit seems to be working and opening it again is a little hard already, so I'm not planning to unless it loosens too much over time. TinkerCad files are at: * [Ultimate GPS Top.stl](https://www.tinkercad.com/things/dqHp13N85MJ) * [Ultimate GPS Top 2.stl](https://www.tinkercad.com/things/eCkQXDUtJlf) * [Ultimate GPS Bottom.stl](https://www.tinkercad.com/things/c3AfXiQ5NRl)