Adapter CB09 to Cameo 4

thingiverse

<b>Version 2 is ready - it is interesting for everyone who uses different knives ... <a href="https://www.thingiverse.com/thing:5211589">www.thingiverse.com/thing:5211589</a><b/> --- --- The original holder is very nicely made, I love it. Unfortunately, when cutting, it wobbles back and forth like a dog's tail in my Cameo 4. I think it's due to a little too much clearance to the retaining clips (about 0.5-0.8mm depending on how tightly I put it together) and the lack of a guide on the back as this makes the knife wobble easier . That's why I sat down at the weekend and redraw and adapted it to my needs (I can't say whether the guide rails were necessary, but I did them right away). The dimensions are taken from my CB09 (unfortunately the Chinese don't always take the dimensions of the cheap parts that precisely - so there is no guarantee that yours will also fit) The parts are very tight (no desire for tape and wobbling. <B>So a resin print is recommended and the CB09 needs to be pressed into the parts a bit.</B> I also tried my hand at a scale (with a suitable rotary knob) because I don't feel like fumbling with a label on it (forget the numbers on the scale, you can't see them anyway, but they make the STL nicer ;-) You can use the metal plate from the white adapter that comes with the Cameo 4 so that it is recognized automatically – I think a 14x7x0.5 mm aluminum sheet should also do the trick, but since I don't need the adapter I used the sheet from that. <b>Please note that these are not original Silhouette accessories, so using them can invalidate the guarantee. Use is at your own risk.</b> - UPDATE 22. Jan. 2022: Version 2 is ready - it is interesting for everyone who uses different knives ... <a href="https://www.thingiverse.com/thing:5211589">www.thingiverse.com/thing:5211589</a> - UPDATE 20. Jan. 2022: Today my second CB09 knife holder arrived. As already feared, they don't take the dimensions very seriously. So I added all the parts with a 0.1mm larger inner diameter. The old one has a diameter of approx. 13.83 mm, the new one 13.94 mm. but the big ring fits both. --- This is a Remix from: <a href="https://www.thingiverse.com/thing:4772122">www.thingiverse.com/thing:4772122<b/></a>