Adjustable Can Handle (0.33 and 0.5)

thingiverse

The goal of this remix is to ensure compatibility with both 0.5 and 0.33 beer cans. I made several changes to the design to achieve this. To start, I shortened it so that it fits a 0.33 beercan. Additionally, I added bottom support to prevent the design from tilting accidentally while in use. The sliding area for the M3 nut was lengthened as well. When shortening the handle's design, the original knob wouldn't fit and was difficult to use, so I redesigned the adjustment knob for easier handling. Hardware needed: - 3x M3 nuts - 1x M3 x 19mm screw When assembling it, 2x nuts were placed inside the knob. Without the second nut, the M3 screw would stick out too far and potentially puncture the can. This part requires different settings for printing all at once. I printed it in 0.15 scale with 4 walls. The bottom part was printed with: - 25% Infill (I use cubic infill) - No support - Printed standing The handle was printed with: - 20% Infill (I use cubic infill) - With support, touching the buildplate The adjustment knob was printed with: - 60% Infill - No support Note: I actually printed the knob in 100% infill.