Adjustable Filament Sensor mount for Monoprice Mini Select

thingiverse

This part is not yet tested, but I will update when it is. It is an adjustable filament runout sensor mount for the Monoprice Mini Select. I do not own this printer but know somebody who does, so I will update this when it is confirmed to fit (or not). Posting it as a work in progress in the mean time. ====================================== This is a remix of the following things: Filament Sensor for Octoprint by BrianHanifin, designed to work with an optical run out sensor and a Raspberry Pi running Octoprint: https://www.thingiverse.com/thing:2427313 Locking ball and socket arm by alexrich82 https://www.thingiverse.com/thing:824711 It also includes parts from my other filament sensor here: https://www.thingiverse.com/thing:3106976 And that in turn was remixed from danzca6's "Filament Runout Optical Sensor Generic Full Enclosure": https://www.thingiverse.com/thing:1904488 ====================================== This is designed for use with the same optical end stops as the original: https://www.amazon.com/gp/product/B0719K9Z9R the following M3 hardware is necessary to assemble this: 2x M3x25mm screws + washers 2x M3 nuts To complete this mount, you will need to print the following parts from the Locking ball and socket arm by alexrich82 (https://www.thingiverse.com/thing:824711): ball_and_socket_v5_-_main_body To print, please rotate the parts so they use minimal supports.