adjustable gpu bracket

thingiverse

I have this HUGE NVidia 770 gtx that was constantly leaning in my case. I don't like when things are not straight, so I designed an adjustable bracket to keep it horizontal. The bracket makes contact with the gpu shroud between the two fans and its secured in place using 3 screws on the pci expansion ports. You can use the default thumbscrews that came in with the case, but you have to leave the ports behind the case open, or you can change the thumbscrews with normal screws and keep everything closed. Print Settings Printer Brand: Ultimaker Printer: Ultimaker 2 Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.2mm Infill: the higher, the tougher Notes: I printed this with a 40% infill in clear blue pla from Ultimaker. Even when I play the gpu does not go hotter than 60°C, also the bracket makes contact with the gpu on the fan shroud, which is always cool, so I've had no deformations at all. Feel free to experiment with the materials and make sure that the bracket doesn't block any fan. Feel also free to modify my design to accomodate your case/gpu