Adjustable Phone holder

prusaprinters

<p>This is a massive phone / tablet holder, witch has freely adjustable angle from 95° to 175°. It has nice, elegant design, and it is pretty compact, as You can see in the pictures. Compatible with phones / tablets thinner than 12.5 mm.</p> <p>The mechanism of the phone holder is based on tight tolerances.</p> <p>You can print it without any supports. For printing I recommend to use PLA, or some other stiff material. When printed out, for assembly You need a press or rubber mallet / a small hammer, and You have to press the three parts together, as You can see in the pictures.</p> <p>I hope You enjoy my design :)</p> <h3>Print instructions</h3><p>This phone / tablet holder is printable without supports.</p> <p>For printing use PLA.</p> <p>I recommend You to use 3 perimeters.</p> <p>Recommended layer hight is 0.2mm, but You can also use finer settings.</p> <p>Recommended infill is 20-30%.</p> <p>For one stand You have to print these files:</p> <p>holder_leg_1.stl<br/> holder_leg_2_pl.stl OR holder_leg_clean.stl<br/> stand.stl</p>