Adjustable Phone Stand

thingiverse

This adjustable phone stand is one on of my fist projects with a 3D Printer. The design was kept as simple as possible. With a width of 80mm and a height of 90mm, this phone stand is also suitable for large moblie phones such as the IPhone 8 Plus. Content list: -Part-1_base.stl -Part-2_grip.stl and -Part-3_Phone-stand.stl -Part-4_Phone-stand-clip.stl or -Part-5_complete.stl You need to assemble Part-3 & Part-4 - this way you can save a lot of support structure. If you choose the combination of Part-3 and Part-4 you have to pick up the right size of Part-4 and glue them together with superglue. With my setup, Part-3 and Part-4-13.60_x_12.60.stl fit together perfectly. You should take a look at the thickness of your Phone: Then you can choose from three different types of phone thicknesses: 10mm, 12mm and 15mm What you need in addition: -M5 nut -M5 x 25 hex bolt The M5 screw should have a length of at least 25mm. Please share the result or leave a comment. Hope you like it =)