Adjustible Monitor Stand (60mm-110mm)

prusaprinters

<p>NOTE: Do Not Use the Completed Assembly STL; the parts must be printed separately</p><p>NOTE@: Improvements have been made to this since I imported from thingiverse…. I will address at some point (better turning handle, etc.)</p><p>This is a pretty large print, a 200m base and top plate. Could be broken up and glued together relatively easily.</p><p>Could easily be adjusted from about 60mm in height to around 110mm in height. Pretty stable but very basic design, not foolproof (there are no "stops" to prevent platform from going too high, or stopping the gears coming off their bases/pivots).</p><p>And my apologies for the terrible video quality; just grabbed an old iphone and did it in situ in my dining room.</p><h3>Print Settings</h3><p><strong>Printer Brand:</strong></p><p>Prusa</p><p><strong>Printer:&nbsp;</strong></p><p>i3 MK3</p><p><strong>Rafts:</strong></p><p>Doesn't Matter</p><p><strong>Supports:&nbsp;</strong></p><p>Doesn't Matter</p><p><strong>Resolution:</strong></p><p>0.2mm</p><p><strong>Infill:&nbsp;</strong></p><p>20%</p><p><strong>Filament:</strong> Monoprice PLA+ Black</p><p><br>&nbsp;</p><p><strong>Notes:</strong></p><p>&nbsp;</p><p>(note; this print struggled at 215C with MP PLA+, needed to drop it to around 200C to get to a cleaner print)</p><p>Post-Printing =============</p><p>&nbsp;</p><p>&nbsp;</p><p>&nbsp;</p><p>Category: Office</p>