ADSM302 Microphone Arm Mount

prusaprinters

<p>Microphone arm mount for ADSM302 or similar microscopes with up to 35mm in mount diameter.</p> <p>You will need:<br/> 3 x M3 square nuts<br/> 3 x M3x10 or similar screws<br/> 1 x M3x40 mm or similar screw</p> <p>These parts should be familiar to Prusa owners and will still be in the spare bag.</p> <p>Drop in the 3 nuts into the slots from above and screw in the short screws to hold your scope.<br/> The longer M3x40mm screw goes through the longer arm piece from the inside. Just screw it as far as it will go. This will act as a stiffener for the arm and will prevent you ripping your holder off when you move the microphone stand by the scope itself.</p> <p>The arm shown here is a cheap Tonor T20.</p> <blockquote><p>If you need one of my things printed or you want to suggest a modification on a part please drop me a message!</p> <p>If you print one of my things i would be happy about some feedback and a make!</p> <p>If you like my things please consider <a href="https://ko-fi.com/U7U6G0X3">supporting my caffeine addiction!</a></p> </blockquote> <h3>Print instructions</h3><p><strong>Printer Brand:</strong> Prusa</p> <p><strong>Printer:</strong> I3 MK3S</p> <p><strong>Supports:</strong> No</p> <p><strong>Resolution:</strong> 0.15</p> <p><strong>Infill:</strong> 100%</p>