Air Hockey Set

thingiverse

The uploaded STL's include a small and large air hockey pallet, and an air hockey puck. If you are planning on using this for a smaller air hockey table I would recommend the small pallet and for a standard size the bigger one. I printed the bottom half of the pallets with 50% infill and the top half 15%, but if your slicer doesn't have the infill splitting option 30% would do fine. The puck should at least be 65% infill if you don't want it to break. I also use the small pallet to hold electrical tape and solder when I'm working on projects. I designed the hockey puck with a small incline in the centre to trap air and go faster on the table. I didn't add the usual round grip on top of the handle because usually when printed it gets scratchy and no one likes sanding. Please leave a comment if you have any questions or thoughts for anything I should change or add.