Air Inlet for Midea Real Cool 35 AC

thingiverse

This is an inlet for the Midea Real Cool 35 AC. The optional dual hose offered by Midea is very expensive and hard to get. It is designed to be mounted on the Inlet next to outlet hose to use a standard 150mm hose, which I also recommend since the cross section is the same as the intake area of the air conditioner. There is a second variant for a 130mm hose if needed, but the cross section decreases to 75%. The 150mm variant needs a bed size of 210x185mm with 120mm height, the 130mm variant needs 190x185x110mm. If your bed is only 200mm, there is another variant for this, but in this case the inlet hose moves closer to the warm outlet. All hose connections are conical with 2mm smaller diameter at the beginning for better threading. I attached the inlet on the AC with double sided tape. There are some parts for a board mount of the 150mm hose included, a mount with grid, a separate hose socket, so the hose can be removed easily from the mount and a Lid to close the hole. If there is another diameter needed e.g. the inner diameter of the 130mm differs, let me know in the comments.