Airless Tyre for Traxxas E-Revo VXL (Dual Extrusion)

prusaprinters

<p>Designed these to use with my Traxxas E-Revo VXL 1/16. Its a dual extrusion print. I used PLA (green) and Flex (black). These tires drift more than the other tires we can buy for the RC cars. I tried several tires with different flexible materials none grip to the floor well (the Flex filament was the best).</p> <p>Nonetheless great print to make and very fun use in the E-Revo.</p> <p>The tyre has 95mm of outer diameter. The wheel is hex 12mm with 3.5mm of Offset.</p> <p>There are 2 versions:<br/> 30mm width tire (for the front)<br/> 40mm width tire (for the back if you like to use wider back tires)</p> <p>STL for left side don't forget to mirror for the right side. If you forget you can still use it but the tire pattern will not be symmetrical.</p> <h3>Print instructions</h3><p>Unassociated tags: Traxxas E-Revo VXL</p> <h3>Category: R/C Vehicles Print Settings</h3> <p><strong>Printer:</strong> Felix Tec4</p> <p><strong>Rafts:</strong> No</p> <p><strong>Supports:</strong> Yes</p> <p><strong>Resolution:</strong> 0.2mm</p> <p><strong>Infill:</strong> 40%</p> <p><strong>Notes:</strong></p> <p>This is not a complicated print to a dual extruder printer but it takes a while to print, every layer has two materials. My only advice is go slow (i printed 25mm/s) because of the flex filament in the tyre.</p>