AIRSOFT 3lug Adapter

cults3d

*** PLEASE READ FIRST *** AIRSOFT ONLY - do I need to even say this? If you cannot meet the prereqs do not purchase/download! If you do not test the threads please do not complain that it doesn't work! *** You must buy springs (see link or specs below) *** The acetech adapter does not have O-rings. I wouldn't use it in the rain. Prereqs: Print these test threads. If you cannot print fine threads you won't be able to print this model: https://www.thingiverse.com/thing:4849920 or https://cults3d.com/en/3d-model/game/airsoft-3lug-adapter-test-threads If the threads a tight, wipe a little oil on them with a paper towel! You need to source a compression spring. MAX 24mm Outer Diameter and MIN 19mm Inner Diameter and wire diameter 1.5mm. Spring length: 30mm. 25mm will also work. You can find these springs on ebay(link below). I used 1/8 rc buggy shock springs and cut it in half. Or you can find a spring in a local hardware store but the specs have to match. Wire diameter can be 1.2mm but thinner than that and it might be weak. ** The best is the 22mm OD, 1.5mm wire and 30mm long**. This Model is a 3 lug adapter for Looks only! It goes on the airsoft "suppressor" side and mates with this file: https://www.thingiverse.com/thing:4843161 (It is a remix from thingiverse and cannot be included in these files). I have not tried with other 3 lug mounts on the barrel side. I do NOT recommend closing the end and trying to make a functional airsoft suppressor. You may break the model. Also this should NOT be used on real firearms. It is plastic and I take no responsibility for any damage or injuries. Please see the instructions on the spring. I included male/female thread models so you can create your own attachments. This one works great. the 1.5mm wire diameter 22mm Outer Diameter, 30mm long version: https://www.ebay.com/itm/154185039511?var=454309107281