Airsoft 5 steel plate hanger target rack

thingiverse

This is a 5 steel plate hanger target rack for airsoft. The plate hanger brackets and chain anchors are 3D printed. The plate brackets are designed to hold the plates at a downward angle to prevent BBs from directly bouncing back at you. Other than the 3D printed parts you will need 4" round electric outlet covers as the plates, 4mm stainless steel ball chain, stainless steel M5 x 8mm screws and some wood for mounting everything. Links are provided for the parts I used. Chain holes for a single plate are 4" apart and 2" between chains for other plates. I'll post additional pictures after I get the frame installed. Plates: https://www.amazon.com/dp/B00C3YDA26?psc=1&ref=ppx_yo2_dt_b_product_details Chain: https://www.amazon.com/gp/product/B0871YRYMG/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&psc=1 M5 x 8mm screws: https://www.amazon.com/gp/product/B08152B2ZX/ref=ppx_yo_dt_b_search_asin_image?ie=UTF8&th=1 Top Wood Bar: https://www.homedepot.com/p/36-in-x-2-in-x-2-in-Pressure-Treated-Wood-Square-End-Baluster-102596/202297458 Update 2021-10-13: I added two 3D printed plate options. One with press tabs and one with screw holes. Obviously won't have the same "ding", but hey, 3D printed. I also added a 100mm spacer tube for hanging the plates on something like a single run of paracord instead of the individual chains on wood, to keep them separated, and a plastic washer for hanging with cord instead of a chain, on a wood bar. Just tie a knot in the cord. I haven't tested these so I don't know how they will perform but will test in the future and will take pictures while testing. Paracord: https://www.amazon.com/BENGKU-Survival-Mil-SPEC-Parachute-MIl-C-5040-H/dp/B07226B3FJ/ref=sr_1_5?dchild=1&keywords=paracord&qid=1634174622&sr=8-5 Update 2021-10-14: Added pictures of finished wooden frame. Update 2021-10-25: I noticed that after many shots on these targets with .30g BBs, the M5 nuts worked themselves loose. I'd recommend some M5 lock washers or blue Loctite.