Airsoft Shotgun (Gas)

thingiverse

WARNING! AIRSOFT GUNS ARE NOT TOYS!! This Is a fully functional Airsoft shotgun, using green gas shells. It is easy to assemble, and should be lots of fun outdoors. BOM: - Strong Super Glue or Epoxy -Wire cutters Assembly Guide: 1. Glue or Epoxy together the Stock, and let it dry. 2. Insert firing pin into the back of the Main Body. 3. Insert trigger, and put in a pin included from the Small Parts Trigger Firing Pin Ect stl file. 4. Pull the trigger until the firing pin protrudes about half a centimetre. 5. Use the wire cutters to cut it to the necessary length. 6. Glue or epoxy the Main Body to the finished Stock. 7. Glue Barrel 1 to Barrel 2, making sure to put extra glue on the forearm for strength. 8. Once it's dry, put the Barrel onto the Main Body, and put in a pin. 9. Put the Barrel latch from the Small Parts Trigger Firing Pin Ect stl file, (the only remaining piece) inside the small hole on top of the Main Body. Slide it in or out, to lock or unlock the barrel. Congratulations! Your Airsoft Shotgun is complete! Have fun and be safe!