Alien emoji keychain

thingiverse

Alien keychain. For the eyes part use glow-in-the-dark filament, and for the face part use standart PLA. Assembly can be a little tricky. I recommend pressing the printed eyes and mouth halfway down the face, then turning it over and applying it to a flat surface. You should be able to hear a click. You will need to calibrate your printer before starting, as alieneyes.stl objects are very small and cannot be printed using brim, otherwise they will not fit. If you don't want to print the alieneyes.stl file, you can change the filament mid-print of the alienface.stl file to get the same results as I did, using multiple parts. You can also choose not to print the alieneyes.stl file at all (maybe that's how you like it). To make sure parts don't fall out, coat them with a small layer of glue before assembling. I used a resolution of 0.12, which took me about 25-30 minutes to print both .stl files. Feel free to change the resolution to something like 0.20 and give me feedback. If the parts don't fit at all, scale alieneyes.stl slighty in your printing software and assemble it using glue.