Alula-ish free flight glider
thingiverse
Alula inspired free flight glider. 1/5th scale. Glides well. Instructions PLA 2 shells .2mm layer height standard PLA setting Simplify 3D: 100% infill to get nose weight Snap together, leading edge first then bend the trailing edge to slide in to tail. After assembly you may need to put some reflex in the elevons. IE lift the trailing edge of both wings a bit. Also adjust either the left or right elevon to fix roll issues. IE left trailing edge up if it rolls right and right trailing edge up if it rolls left. Update: Added wing v4 and tail V4 which moves the center of gravity more forward and is easier to adjust post printing. Glides more stable. Added launch point to fuse for use with rubberband. Also print both parts, wing and pod at 100% infill. If you feel the glider is nose heavy, print with less than 100% infill
With this file you will be able to print Alula-ish free flight glider with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Alula-ish free flight glider.