American Flag SCAD model

thingiverse

This is an American Flag generated from the included .SCAD file. The flag is up to spec per below sites: https://en.wikipedia.org/wiki/Flag_of_the_United_States#Design https://www.codeproject.com/Articles/18149/Draw-a-US-Flag-using-C-and-GDI There are 3 variables you can use to customize the output as follows: height = 1; // thickness of flag in mm width = 100; // width of flag in mm printcolor = "all";//["all","red","white","blue"] The length is automatically calculated from the width so that it remains proportional to the width as referenced in the spec. OpenSCAD shows the colors in the preview mode, but shows as a single color when you render it as the STL format doesn't support multiple colors. Therefore I included the printcolor option to allow you to render a single color at a time and put it back together using your slicer software. I also included the STLs for a sample run for red, white & blue colors using a width of 100mm and height of 1mm. I also successfully followed the instructions by JoanTabb for printing with multiple colors with a single extruder using PrusaSlicer here: https://forum.prusaprinters.org/forum/prusaslicer/manual-multicolor/ This is the first SCAD file I ever wrote. Please let me know your thoughts to improve it so that I can continue to learn. Happy Printing.