Amiga 1200 OLED Gotek USB disk drive emulator base - Floppy Buttons

thingiverse

This remix moves the Gotek control buttons to the original Amiga 1200 Floppy Eject button opening. It does not require any modifications to the A1200 case, but DOES require a hardware modification to the Gotek emulator. **IMPORTANT NOTE: This only works with a hardware modified Gotek. You must un-solder the pushbutton switches from the top of the Gotek PCB and re-solder them to the bottom of the PCB.** This is a remix of Lemaru's design, which is a remix of the original CrazyBob design. This version is designed the 0.91" OLED screen. I could also create a version for the original 7-segment LED display if necessary. The OLED display is held in place with a small retainer plate that slides into place, so no need for any glue, which also makes it easy to remove the display if required. Note: The photos show my first prototype test print (partial print, only from the USB jack over). It's buttons did work, but were a little too close to the bottom of the 'eject' button opening on the Amiga and didn't always allow the buttons to release, so I've moved the buttons up 1mm in the current STL file. **This is a work-in-progress** I'll probably create other variants and attach them as separate STL files... *** ++Updated STL to v1.1++ with a small nub at the buttons to allow better contact with the buttons. It will need to be filed down for best contact with the buttons. I'm also working on a newer design which may make eliminate this step...*** *** ++Updated STLs to v1.2++ - Better button design, but requires the buttons to be printed separately 'sideways' and glued in place. *** I'm working on a version that also covers the floppy slot completely for a super-clean look. *NOTE: This was printed in Blue filament just because that's what I currently have loaded in my printer, and it shows up great for the pics. You'll probably want to print it in white or n off-white color to better match the Amiga. ;-) *