An Apple Pencil holder REMIXED

thingiverse

Just print the STLs Or use the gcodes designed for Hatchbox PLA on Tevo Tornado (stock glass bed) with proper colors. May work with other printers use gcode at your own risk as they contain my custom startup purge and BLTouch leveling. Included are ------------------------------------- Modified STLs from the original Make https://www.thingiverse.com/thing:793041 +++ Gcodes for the Tevo tornado with BLTouch 300x300 stock bed. Load to SD card and print Apple Puzzle.Gcode = RED Apple Leaf and Base.gcode = Green For the wurm print in order wurm1->wurm2->wurm3 Printing ----------------------- Load and print STLs to your slicer and print. OR Load the Gcode files and print Printing from Gcode In between wurm 1, 2, and 3 do a filament change and print next file. The Gcode is set to print on top of the last file with the new color. Gcode contains code for Auto Leveling It uses the M117 Load Mesh Data and M420 S1 so auto level your bed manually and save setting prior to printing. Firmware should ignore the mesh load and level option if you do not have a leveling sensor but if you do not have one it may not print from gcode files. It will print in 0.2 layers after homing to the center of the bed and an extruder purge in the lower left corner of the bed to help prime the new colors. The Wurm is set left and low so auto home with BLTouch does not hit the print. Included is the modified STLs, gcode files, and instruction on how to assemble the apple.