Anet A8 Profile

thingiverse

*Configurare Cura per Anet A8* ======================== Impostazioni--> Stampante--> Aggiungi stampante in Other scegliete Prusa i3 e impostate tutto come nella foto  ####**Start Code** ------------ >G21 ;metric values >G90 ;absolute positioning >M82 ;set extruder to absolute mode >M107 ;start with the fan off >G28 X0 Y0 ;move X/Y to min endstops >G28 Z0 ;move Z to min endstops >G1 Z15.0 F9000 ;move the platform down 15mm >G92 E0 ;zero the extruded length >G1 F200 E3 ;extrude 3mm of feed stock >G92 E0 ;zero the extruded length again >G1 F9000 >M117 Stampa... ####**Stop Code** ----------- >M104 S0 ;extruder heater off >M140 S0 ;heated bed heater off (if you have it) >G91 ;relative positioning >G1 E-1 F300 ;retract the filament a bit before lifting the nozzle, to release some of the pressure >G1 Z+0.5 E-5 X-20 Y-20 F9000 ;move Z up a bit and retract filament even more >G28 X0 Y0 ;move X/Y to min endstops, so the head is out of the way >G90 ;absolute positioning >G1 Y190 F9000 ;use this line if you want the bed to move to the front. delete if not. >M84 ;steppers off