Angel Cat - Remix for FDM printing

prusaprinters

<p>Update: As requested, I've added an Angel Cat solid with Ring to the files.</p> <p>Update: My skills with Meshmixer are getting better. Decided to revisit this remix and post a version with the hollow filled in. Added the file "angel_cat_Solid.stl" which is not hollow and is oriented in the best way I found to print this model with FDM.</p> <p>I have an adopted cat whose name is Angel. When I saw the design, I had to print it. That's how this remix of a remix happened.</p> <p>This is a beautiful piece remixed by <a href="/corpusdemonicum">corpusdemonicum</a> and published as <a href="https://www.thingiverse.com/thing:3221922">Angel Cat</a>. The original remix is printed on an Anycubic photon dlp printer. I remixed the remix by closing the holes and setting an orientation to print on my HyperCube Evolution.</p> <p>Update: Added "angel_cat_Remix3.stl" which adds a ring to the design so it can to be hung as an ornament.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>HyperCube Evolution</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>No</p></div> <p><strong>Supports:</strong></p> <p>Yes</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>.2</p></div> <p><strong>Infill:</strong></p> <p>None or 100% (See text)</p> <p><strong>Filament:</strong></p> 3D Solutech PLA <p>White</p> <p><br/> <p class="detail-setting notes"><strong>Notes: </strong></p> </p><div><p>The stl file is oriented to the best printing solution I found.</p> My slicer settings for hollow version were: <ul> <li>Wall thickness 1.2mm</li> <li>Supports set to touching build plate</li> <li>Support roof enabled and Z distance at .15mm</li> <li>Overhang Angle 55 degrees</li> <li>Support Density 15%</li> </ul> <p>My slicer settings for filled version were:</p> <ul> <li>Wall thickness 1.2mm</li> <li>Infill 10% Gyroid</li> <li>Supports set to touching build plate</li> <li>Overhang Angle 55 degrees</li> <li>Support Density 15%</li> </ul> <h3>Note</h3> <h4>When printing the version with the ornament ring I used 100% fill to add strength to the ring and wings. The design will still print as hollow but the area between the outside and inner walls will be filled.</h4> </div></p></p> Category: Decor