Antonio's Kissing Couple

thingiverse

For Lori, my wonderful wife. :) Based on the animation model I found here: https://grabcad.com/library/kissing-couple-1 3D print in one shot using the UM2_antonio_final.stl file. That's what I did but, it's a long job (9 hours). Or 3D print the individual parts using the respective .stl files. Position them as shown in the "final" file for best results. **You'll need to (carefully) drill/file all holes!!** The crank handle was especially annoying (should've made the hole bigger). I used hot glue to assembly the parts (with the table's side part as last) ~~The pictures shows version 1.0 of the design.~~ The latest files/pictures are the final 2.0 version where ... Based on the learnings from my version 1.0 efforts, I did the following for 2.0 ...     1) printed in white (best for painting)     2) made sure crank is vertical (printing horizontally resulted in flat spots) and     3) put starter hole in gear stops (when solid, it was tricky drilling the center hole) Enjoy!! Oh, the texture on the faces changed on me depending on printer resolution (I started with 0.20 and then, settled on 0.15) and the orientation of the parts. You'll need to experiment with these variables, if you care. https://youtu.be/CI3IDpBVSjw