Anycubic i3 Mega s - Cable Chain Mounts
thingiverse
After all the cablechains I printed myself could not withstand the high temperatures in the closed box my printer stands in, I decided to buy a ready-made cablechain and only print the holders myself. Holders are designed to work with: https://www.amazon.de/gp/product/B07QLGWQ1L/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&th=1 What you also need: M3x10 Hex Bolt -> 8x M3 Nut -> 8x M3 Washer -> 8x M4x12 Hex Bolt -> 2x The Part for the Bed uses the rear most two mouniting points for the linear bearing (M3 nuts and bolts). (extruder side) The Part for the Base uses the two pre drilled holes next to the exit point of the bed cable (M4 bolts). You may or may not use one ziptie on each end of the chain. UNPLUG THE PRINTER!!! You need to open the base of the printer to mount the base part. UNPLUG THE PRINTER!!!
With this file you will be able to print Anycubic i3 Mega s - Cable Chain Mounts with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic i3 Mega s - Cable Chain Mounts .