Anycubic Kobra Filament Guide Roll

prusaprinters

<p>You will need this parts:</p> <p>2 Bearings: MR106-2RS for each roll</p> <p>This is a bracket to guide the Filament over the top of the Anycubic Kobra (Not Max!)</p> <p>I used a 0.1mm Tolerance to fit in the Bearings.</p> <p>In TinkerCAD there is another Version of it. <a href="https://www.tinkercad.com/things/88lp8VYlQPl">https://www.tinkercad.com/things/88lp8VYlQPl</a></p> <p>Edit:</p> <p>I updated the Design with a 3-arm design (preconfigured holes for the already provided screwholes) and a configured roll, that can be printed with no supports. The single roll holder can also hold the new rolls.</p> <p>On the Picture i forgot to mirror one holder (the screwhole is not in middle position!) and i had to drill a pretty ugly hole. So dont forget to mirror the holder, or just use my All-in-One STL file.</p> <p>Update 2:</p> <p>Where 1 Arm and 3 Arms is, there should also be a 2-Arm-Version ;)</p> <p>So i updated the design with a 2 Arm and Filament slipping protector.</p> <p>Now the filament wont be torn off the rolls. You can still use the "Old" Rolls from the 3 Arm Design.</p> <h3>Print Settings</h3> <p><strong>Printer:</strong></p> <p>Anycubic Kobra</p> <p class="detail-setting rafts"><strong>Rafts: </strong> <div><p>Doesn't Matter</p></div> <p><strong>Supports:</strong></p> <p>No</p> <p class="detail-setting resolution"><strong>Resolution: </strong> <div><p>0,10mm</p></div> <p><strong>Infill:</strong></p> <p>30% Gyroid</p> <p><strong>Filament:</strong></p> Anycubic PLA <p>Black How I Designed This ===================</p> <p>I remixed the Clip from the other project and added my own roll and the "circles" for the Bearings.</p> <p>Alternative you dont have to use the Bearings and can widen the 3mm tall slots to fit in each other.</p> <p><a href="https://www.tinkercad.com/things/88lp8VYlQPl">https://www.tinkercad.com/things/88lp8VYlQPl</a></p> </p></p> Category: 3D Printer Accessories