Anycubic Mega Zero - Gantry adapter and clip for Hero Me Gen 5
thingiverse
On the Anycubic Mega Zero forum on Reddit (https://www.reddit.com/r/AnycubicMegaZero/) there were people asking for an adjusted version of the Hero Me Gen 5 (HMG5) https://www.thingiverse.com/thing:4460970 for the Mega Zero. Here it is! MZ-Gantry-adapter_1A.STL is for the stock hotend and similar types. MZ-Gantry-adapter_1B.STL is for the E3D v6 hotend and similar types. MZ_Gantry_Clip_1.STL is to be used for both Gantry adapters. When mounting the assembled Gantry adapter and Base part you can pass the wires for the X endstop through the opening as shown in the photos. Thanks to all the people in the Mega Zero group that helped with the development of these parts. If you have any ideas for the Anycubic Mega Zero 1.0 or 2.0 then please post it in the group: https://www.thingiverse.com/groups/anycubic-mega-zero. Please enjoy ! **Update 30-07-2021. I've made a Quick release version that uses a bolt connection that is accessible from the top and it makes it possible to remove the Base part whilst the Gantry adapter is still attached to the gantry plate. This makes it easier to change and add parts to the Base part.** **Check out: https://www.thingiverse.com/thing:4920420**
With this file you will be able to print Anycubic Mega Zero - Gantry adapter and clip for Hero Me Gen 5 with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic Mega Zero - Gantry adapter and clip for Hero Me Gen 5.