Anycubic Mega Zero - Smart filament sensor mount

thingiverse

Based on a great idea of Ivader posted on https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general/topic:48565, this is a simple mount for a Smart filament sensor: https://www.aliexpress.com/item/4000269547406.html The part can be printed without supports and it has a breakaway support that can be easily removed. Use the extra screws that you receive with the sensor to fixate the mount to the sensor and then just slide the construction onto the metal plate near the X-axis motor. For further information about the sensor and implementation, please contact Ivader: https://www.thingiverse.com/lvader/designs **Note that this design is for the MegaZero 1.0** **If you have any ideas for the Anycubic Mega Zero, please post it in the group: https://www.thingiverse.com/groups/anycubic-mega-zero/forums/general, and we will see if we can help you with it.** **Thanks !** === Update 05-06-2021 (Smart filament sensor mount - Rev06.STL): Corrected minor errors like not continuous surfaces and sharp thin walls.