Anycubic Mega Zero X-Axis Linear Rail Upgrade w/ ADXL345 mount

thingiverse

<b>Note:</b> due to the general abandonment of Thingiverse and recent security issues, I've moved my designs to the Prusa Printers site: https://www.prusaprinters.org/social/171511-djos_1475/prints -------------------------------------------------------------------------------- This X-Axis Linear Rail Upgrade is designed for use with my Orbiter Direct Drive System: https://www.thingiverse.com/thing:4856555 This uses an MGN12H with 300mm Rail. A neat feature for Klipper users is the dedicated ADXL345 accelerometer mount. I’ve also made an ADXL345 accelerometer mount for the Y axis: https://www.thingiverse.com/thing:4899506 UPDATE: Added a "Rail End-Stop" that can be mounted with T-nuts to the Aluminium extrusion. This System should be printed in ABS or ABS+ as PETG may not be able to withstand being in such close proximity to the heat-block, even if you are using a silicone sock. The nuts should all be installed into the X-carriage using a Soldering iron. Use 3 of the included Linear Rail Holder's to ensure you mount the rail nice and straight. Please make sure you have a good range of Bolts & Nuts as you'll need the following: <h3>Nuts:</h3> x2 M2 x6 M3 x6 M3 T-nuts <h3>Bolts:</h3> <b>Linear Rail:</b> x6 M3 x8mm <b>Linear Rail X-Carraiage:</b> 1x M3 x8mm (for under the extruder heat sink) 3x M3 x6mm <b>Hot-End heat-sink:</b> 2x M3 x22mm 4x 0.5mm thick M3 Washers/spacers <b>Orbiter and Fan Mount:</b> 2x M3 x10mm <b>ADXL345:</b> 2x M3 x10mm <b>X-Endstop:</b> 2x M2 x12mm <b>NOTE:</b> You will need to compensate for the loss of 10mm in the Y-axis - this is dead easy in Klipper but I've no idea how Marlin manages this sort of thing.