Anycubic Photon 80mm fan + funnel

prusaprinters

<p>The internal 50mm fan does not do a great job when it comes to reduce odour.</p> <p>I created a funnel so that the standard 50mm fan AND an external 80mm fan are connected + created a way to test a variety of filter materials and cartridges. The cartridge is a simple "slide on" design.</p> <p>Every part needs support material but is printable on a standard single nozzle printer (Prusa,...)</p> <p>You need:</p> <p>4x M3 brass inserts for the thread or you adapt my design to install hex nuts</p> <p>4x M3 Screws to mount the adapter plate, the fan and the mounting plate.</p> <p>You just have to remove the internal (metal) filter cartridge, use the 2 screws to mount my funnel design (you can only mount 2 even if there are 4 holes).</p> <p>The funnel needs to be installed from the bottom as it's to big for mounting it from the back.</p> <p>Feel free to test your own filter material or design your own filter cartridge.</p> <p>EDIT 2019-12-11:</p> <p>1.) I added a funned to connect a 100 hose onto the printer instead of the filter cartridge</p> <p>2.) tip: to remove the support material in the "slide on slots" use a sharp 2mm screwdriver: works like a charm!</p> Category: 3D Printers