Anycubic Photon Mono X Rear Angled Vent

thingiverse

I needed a vent adapter for my new Anycubic Photon Mono X and didn't like the ones already here with the vent pointing straight back so i chose to make my own that's angled to the side. So far there's 4 versions, with differences in screw length and versions with undersized vent connection. The longer screws i used are M3x12. Standard screws 98/100mm Long Srews screws 98/100mm I suggest 0.2mm layer height so there will be no need for support. PS: To have any use of this you really need to change the direction of the fans in the printer, it's around 1-2 hours work and you will need to modify the fans by drilling out the holes to fit the heads or use longer screws. The space inside the printer is tight so be careful. A side effect of turning the fans around is that the bottom fans are blowing directly at the heatsink for the UV LEDs, could mean longer lifetime for them? You do this at your own risk!