Anycubic Photon VAT cover System
thingiverse
Hello, this is a cover system for the Anycubic Photon Resin VAT. 1. is a simple one you can put on the VAT if it is still installed. there are 2 Versions - the "full" version needs longer to print and also more Material - so its a bit heavier. 2. there is a bottom where you can place a microfiber cloth in to protect the FEP film. 3. is a simple version of the botom without inlay 4. is a Top with outlet there are also 2 knop version - one is for cutting the thread with a screw, the other one is for a thread inlay you can melt into. you need: 1 x m3 x 8-12mm countersunk screw for the knop. 1 x m3x12mm countersunk screw for the lever of the outlet 2 x m3x8mm countersunk screw for fixing of the lever. 12 x m3x6mm countersunk screw for the inlay of the bottom. 15 m3 screw nut
With this file you will be able to print Anycubic Photon VAT cover System with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Anycubic Photon VAT cover System.