Apple TV Remote AirTag Case

prusaprinters

<p><strong>This is essentially a slight remix of the ‘Original Siri Remote Holder with AirTag’ by makanadumlao on Thingiverse: </strong><a href="https://www.thingiverse.com/thing:4851515"><strong>https://www.thingiverse.com/thing:4851515</strong></a><strong>.&nbsp; I removed the lanyard holes and made it slightly more ‘no support’ friendly.</strong><br>&nbsp;</p><p>I love the fit and feel of this case and I use the added AirTag functionality daily because my kids can never remember where they left the remote!!<br>&nbsp;</p><p>While you should be able to get away with no supports, I did use them for the top part (front or nose of the case where the hole for the IR sensor is located) to ensure a proper fit and at the base where the case is rounded, in leu of a brim. My Prusa Mini+ does do pretty well bridging with PLA, so I likely didn’t need the supports.<br>&nbsp;</p><ul><li>Print upright as laid out in the stl file and shown in the photos</li><li>Use a brim if you aren’t using supports at the bottom and you print fast ;)</li><li>PLA or PLA+</li><li>.20 layer height (although .15 may have a slightly smoother feel)</li><li>10% infill is sufficient</li></ul>