Apple Watch Stand CRT Monitor

prusaprinters

<p>I recommend printing at 10% infill to make sure the back of the model isn't too heavy</p><p>The cord will be strained at the bottom, but it is hard to avoid it to keep the design of the model</p><p>Depending on your printer, the charger may be hard to put in the model, so supports can be placed there</p><p>I've also included the Fusion 360 file if you want to remix it or make modifications. It's in the public domain</p><p>Edit 7/3/22: I added connectors for the parts so you can print it in 4 parts with less support. If the connections are too tight, sand them down. If they're too loose, use glue. Also this is different than the one in the photo</p><p>You'll need supports on “back.stl" but supports are recommended on “front.stl” and a brim may be needed on “joint.stl”</p><p>Do not print the stand or joint with any horizontal expansion as it might be loose, and it will be a tight fit to keep it from drooping&nbsp;</p><p>Edit 7/5/22: Added spacer and spacer stand to prevent it from drooping and to route the cable</p>