Aquarium Heater Holder for BRS Titanium Heater (Schego) and other 1" diameter heaters

thingiverse

Remixed some heater brackets for use with Bulk Reef Supply Titanium Schego heaters (or a 1" diameter heaters). DualAquariumHeaterHolder_BRS_Schego.stl - Base is 1/4" thick and is a solid base w/ no holes, etc.. (nothing for crud to build up in). DualAquariumHeaterHolder_BRS_Schego_LessMaterial.stl - Removed some side material on the base to require a little less filament. DualAquariumHeaterHolder_BRS_Schego_LessMaterial_And_Endstop.stl - Removed some side material on the base, took away the rounded corners, extended the end of the base to allow a 1/4" end stop the heaters can rest against to prevent the heaters from possibility touching the acrylic panels in a sump. DualAquariumHeaterHolder_BRS_Schego_LessMaterial_And_Endstop_And_Long.stl - Same as above but its longer. This is the print I am currently am using in my sump. SingleAquariumHeaterHolder_BRS_Schego_LessMaterial_And_Endstop_And_Long.stl - Nearly the same as the above version except its for a single heater.