Aquarium water test kit holder / rack

prusaprinters

<p>This is a customized holder for all of my aquarium water testing supplies. It includes spots for:</p><ol><li>Each item in the API water test kit (including the manual/color chart)</li><li>A bottle of 100ct Tetra test strips</li></ol><p>A pipette for transferring the aquarium water to the vials There are also slots for building a bridge to use 15ml plastic test tubes rather than the glass API 5ml tubes. The optional supports give the tubes a little more stability. If you want to use the supports, print 2x of the legs and 1x of the bridge.</p><p>Also, don't feel the need to comment and say my Nitrites and Nitrates are high... I know they are. I'm cycling my tank before adding fish :)</p><h3>Print Settings</h3><p><strong>Printer:</strong></p><p>Prusa Mini</p><p> </p><p><strong>Rafts: </strong></p><p>No</p><p><strong>Supports:</strong></p><p> </p><p>No</p><p> </p><p><strong>Resolution: </strong></p><p>0.3</p><p><strong>Infill:</strong></p><p> </p><p>15%</p><p><br/> </p><p><strong>Notes: </strong></p><p>This was designed to fit on a 18cm³ print bed (i.e. Prusa Mini). The width is 178mm, so I had to remove the skirt in order for it to fit.</p><p>I printed at 0.3mm detail with a 0.8mm nozzle using PLA; however, PETG might prove to be a better choice. Time will tell whether the PLA can cope with getting wet now and again.</p><p> </p><p> </p><p> </p><p>Category: Tool Holders &amp; Boxes</p>