Arasaka Thumbdrive

prusaprinters

<p>The dual extrusion folder contains 4 files. There are 2 versions of the USB print.<br/>The ones with the Arasaka Logo and one with the Relic logo. There are 2 parts<br/>the Black and Silver parts. Merge these 2 files in your slicing software.<br/>This is only possible if your printer supports dual extrusion (printing with<br/>2 filaments). You could try to print them seperately but that isn't tested.</p><p>For non dual extrusion printer there is a folder: single part. This contains<br/>both Arasaka and relic logo prints. This prints both parts automatically together<br/>without having to merge them.</p><p>As a bonus we added a keychain version. This is one without a cap but a hole<br/>for a keychain/ring. There are two versions so check what would fit the used keychain.</p><p>for printing:<br/>Supports are needed to achieve a hole in the main part, this is where the USB hardware goes.<br/>The USB hardware we use is a kingston datatraveller.<br/>Link to this item: https://www.amazon.com/Kingston-Digital-DataTraveler-DTSE9H-16GBZET/dp/B00DYQYITG<br/>But feel free to use any USB hardware that fits. It is 12.5mm by 5mm by 30mm. This can be<br/>enlarged with the blend files (read next part for that) but is quite tricky as the<br/>gap will interfere with the USB hole. The USB hole is the bare space a standard<br/>USB a port takes.</p><p>After printing:<br/>We usually sand and polish the print for best finish. Furthermore remove the supports<br/>and glue in the USB stick. Then you can glue the bottom into the fitting space.<br/>The fitting space could need some sanding as it can print rough on some printers.</p><p>For Tweaking:<br/>The Blender files are also included if you want to tweak the design. There is a file<br/>without the booleans applied, this way it is easier to change the size of the hole or thickness<br/>of the cap. There is also a file where the booleans are applied and everything is a mesh<br/>Booleans are used to add or subtract spaces from an object. If not applied it will also<br/>export the subtraction mesh to the .stl file. (which is why it is needed to apply them).</p><p>File thoroughly tested on a Ultimaker 3, with a 0.06mm and 0.1mm height. Print core used<br/>was a 0.4 nozzle size. Standard printing is with PLA, if you print with ABS note that it could<br/>warp and it will be a little harder to fit the USB in.</p><p>Happy printing and good luck samurai!</p><p>Category: Toy &amp; Game Accessories</p>