Arcade Joystick Box
thingiverse
An arcade stick controller box, for use with an arcade stick and buttons and a USB Controller board bought from amazon. https://www.amazon.co.uk/EG-Joystick-Buttons-Retropie-Raspberry/dp/B075J882S8 Currently being use with MiSTer. Sketchup Design file is included to adjust for your arcade needs. There are two versions of the Top controller part, one is slightly Taller for more of an angle. It should not require Supports, but your printer may vary. I also printed the Mid section with a brim, rather than a skirt for the other parts. You will need some M3 (16mm) screws to screw the base and the top together and some coach bolts for the stick and M2 (5mm) screws for the USB Board. I also left some holes on the base if you want to use some suction cup feet or you can get some rubber feet to screw through the base to top holes also. This will require longer screws depending on your rubber feet size.
With this file you will be able to print Arcade Joystick Box with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Arcade Joystick Box.