Arcade Stick Barebones Case 3D print model

cgtrader

Barebones Arcade Stick. A4 (297mm x 210mm) sized Acrylic required for top and bottom panels. Included in the files are the drawings for these to be lasercut in DWG file format. There are two versions of the case, one has panels that are to be attached to the sides (These are included) and one without and just plain as in the first picture. Joystick slot was measured with a Sanwa JLF arcade stick. Top panel holes are 30mm and side are 24mm. I would recomend Screw in type buttons. The front is designed to take a Neutrik RJ45 locking connector (however the USB version should fit). The model I designed this for is: Neutrik NE8FDP. Also the PCB holders are designed for the PS360+ and Brooks UFB form factors . http://akishop-customs.com/PS360.html http://www.brookaccessory.com/detail/06960737/ Please note whilst I have designed this for 3D printing I have not been able to print this myself. The reasons being 1. I dont have a printer large enough, and 2. All quotes I received to print this put it beyond economical sense. Please also be aware this model is provided as is and I take no responsibility for loss or damages resulting in using this model. Use at your own risk as I have not been able to verify myself how well this will print. Best of luck on this, I only wish I could have printed it myself. However I did a redesign to print on a smaller printer that turned out really well which I will also upload in the coming days. :)