Arctic Cat Choke Lever threaded
thingiverse
This is a remix of the Arctic Cat Snowmobile Choke Lever. Changes that I made include: 1) Add threads to the tube and nut using Poor man's openscad screw library. 2) Increase the size of the base and width of the shaft on the cable puller. 3) Increase the width of the lever to match the puller. 4) Add the text "Choke" to the lever. 5) Create an over sized nut with "Arctic Cat" text https://youtu.be/VU-hWi7gOz0 Print Settings Printer Brand: Robo 3D Printer: R1 ABS + PLA Model Rafts: Doesn't Matter Supports: Yes Resolution: High .1mm Infill: 100% Notes: Supports are only needed for the lever Print the cable puller and main tube at the same time. It can be difficult printing a single cable puller by itself as layers don't have a chance to cool enough and stacking hot plastic results in a melty pile of goo. Post-Printing I used a cotter pin instead of zip tie to connect the lever to the puller
With this file you will be able to print Arctic Cat Choke Lever threaded with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Arctic Cat Choke Lever threaded.