AroundSquare Hydra OS Begleri

thingiverse

Wanted to make my own AroundSquare Hydra and open source it, so I did! There are a few versions in this project... ###**THESE CAN BE PRINTED WITH A .4MM NOZZLE BUT I USED .2MM** ###**YOU MAY NEED TO SCALE THE MODEL A FEW % TO GET TOLERANCES JUST RIGHT OR TWEAK THE PROVIDED SOURCE FILES** ###**ALL WEIGHTS ARE 100% INFILL** ###**14mm "mini" version- ** Replicates Mini Hydra Dimensions and uses 2 m5 nuts to fill the inside with weight, each bead will weigh around** ~2.9 grams **with the nuts inside. There is also a no nut version if you don't have m5 nuts or want finer control of weight. These weigh **1.2 grams each.** ###**16mm "Normal" version-** Same as before, 16mm to replicate a normal Hydra bead. There are 2 versions here, 2 nut and 1 nut for smaller weight granularity **Double Stack--- 3.3g Each bead with nuts** **Single Stack--- 1.6g Each Bead with nut** No Nut version/Accent Bead **1.8g Per bead** ###**1/4 inch by 20 Version-** uses 1/4 inch x 20 nylon lock nuts and fits the original dimensions. **~5.17g per bead** ###**Mc-Master Carr 13mm Spacer Version** This is one I personally use, with that being 1x of the spacer and 1x of the 13mm Accent bead. **The Link to the part I used is in the text file** and each of those weigh 7.5g + 1.1g for the accent bead.