Arri Rosette mount adapters (locating pins type & for Z cam E2)

thingiverse

This is a video about modeling and making an adapter for mounting an arri rosette extension arm or handle grip so that it can be produced by printing. It is designed to be fixed to a camera cage, etc. with 1/4" screws. I don't think there is a need to make it because there are similar types of products on sale, but there are cases where customization is required, so I modeled several types. In the case of the mount adapter for Z cam E2, a 1/4" screw hole spacing of 24mm was applied. For the mount adapter for the Z cam E2, I custom designed a 1/4" screw hole spacing of 24mm. A similarly shaped box camera, the Panasonic BGH_1, won't fit because the screw hole spacing is 22mm. Choose a screw type that is not too large in the head from among the 1/4" screw types for fixing. Large heads are not suitable. [necessary parts] Arri Rosette Gear & M3 x 5mm Screws for Fixing 1.4" screw for fixing the adapter M6 x 10mm thread repair insert and M6 x 17mm screws for arri rosette lock - for locating pins type M3 x 5mm screws for locating pins_2 pcs M4 x 8mm screws for top and bottom fixing_2 pcs Use it for personal use only. Commercial use is not permitted. Refer to the link below for more information and print file(STL). -Optimized for 3D printing https://surplusperson.tistory.com/832 If you found my designs useful, please donate what you think it is worth to my paypal.me. Your donation will be useful for a new housing design on a variety of lenses. https://paypal.me/suplusperson