Arrma 3s Shock Bushing for Ebay 3s Big Bore Shocks

thingiverse

This is an upper shock bushing for generic Ebay Big Bore Shocks for Arrma 3s vehicles. The shock cap eyelet is 5mm wide so without a spacer bushing of some kind you will have 2mm of shock play between the shock and the mounting screw. This bushing eliminates that shock play and gives the shock something soft yet firm to sit on when mounted. Printed in Ninjaflex TPU, 100% infill 0.4mm nozzle. The ninjaflex is one of the most flexible if not the most flexible of TPU filaments out there and that allowed me to squeeze this through the eye of the shock cap with just a hobby screwdriver. If you print in a harder TPU it may be a challenge to fit through the eye hole. If you can't fit it through then cut off one of the ends to feed it through and use some washers to fill up the gap left on the other end. Ebay Arrma 3s Big Bore Shocks: https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=arrma+3s+big+bore+shocks&_sacat=0