Arrow Antenna Tripod Mount System

thingiverse

This is a mounting system to mount the Arrow Antenna on a tripod. The use of the inner and outer sleeves allow the antenna to be rotated approx. 90 degrees in either direction. Hope it's useful to someone! :) Print the following: 2 x Outer Sleeves (no supports required) 20% infill 2 x Inner Sleeves (no supports required) 20% infill 1 x Stopper (no supports required) 20% infill 1 x Base Plate (no supports required) 30% infill - Lay this flat with the portion the jaw grabs onto facing up. 1 x Phone Mount (supports required) 20% infill (This is for a Samsung S4 which was an old phone I had laying around not being used anymore.) I use this to line up the sat using an app called "Heavens Above" and helps point the antenna directly at the sat and helps you track it across the sky.) YMMV :) Assembly: 1. From your local hardware store find appropriate nuts and bolts to secure the Outer Sleeves to the base plate. 2. Slide the stopper onto the antenna. This is a tight fit. May have to tap into place. 3. Glue 1 inner sleeve to the stopper. I also glued the inner sleeve to the antenna by pumping glue into the small space in between. 4. Glue the other inner sleeve to the antenna once you are happy with the position of the outer sleeves. 5. (Optional S4 Phone Mount) Press this onto the antenna in the location of your choice. This is a tight fit, no glue required. 6. Have fun!