Articulated Rpi Camera v2 Holder with Snapfit Spherical Joints

prusaprinters

<p>Rpi camera v2 holder/mount with articulated snapfit joints and mechanical interface to the ethernet RJ45 female connector of your raspberry 3/4.&nbsp;</p><p>The snapfit joints allow to adjust the camera orientation.&nbsp;</p><p>All mechanical interface are either snapfit or dove-tail type. Neither adhesive nor fasteners are needed. The RJ45 male dummy connector doesn't touch the electric pins of the female counterpart. The dove-tail parts can be fitted together by means of an hammer with plastic tip.</p><p>The GCode files include the required support structures. The support structure for the snapfit spherical joints can be easily removed by twisting them with a pair of tweezers.</p><p>The snapfit spherical joints have to be mounted 1 by 1 and oriented step by step. Fine tuning of the fully assembled joint chain will lead to a rapid unscheduled disassembly. Nevertheless, once correctly oriented, the joint chain will be stiff and resistant to impacts.</p><p>I personally use it to monitor my prints by means of OctoPrint.</p><p>Tested on PRUSA Mini with PETG (PLA is fine as well).&nbsp;</p><p>Constructive comments and returns of experience are very welcomed! Have fun!</p>