artillery reel location modified (handicap)

cults3d

Following a specific request for the handicap (coil too high on the gantry), I created this articulated system with a fibonacci esse to avoid the twisting of the filament (I also provide a fixed version if you don't have the material). necessary equipment: 2 screws M3x6 countersunk head 4 M3 nuts 2 screws M3x8 standard head 1 brass insert M3 1 screw M3x25 classic head 1 PTFE tube 1 tyre connection 1 reel support to be put down. The entire spool holder is removed, and the wire is unclipped from the end of filament detector to the base of the gantry. the "housing" with its decorative "X" is installed on the left end of the X-axis. insert the "insert" in the hole provided for this purpose, first insert a brass insert inside and a M3x8 screw with the head removed and an M3 nut on the underside. lock it with the M3x8 screw. the original ball joint of the end of filament detector is screwed at its end, the detector is inserted into the housing and the cover is put over it. It is screwed with the M3x25 screw and an M3 nut. Finally, remove the grate of the hot air blower, assemble the 2 parts to guide the PTFE ( m3x6 + 2 nuts ) towards the lever. the tyre is fixed, and the PTFE is inserted into the tyre and the lever.