Artillery Sidewinder X1 X Cover with Ribbon Clamp
thingiverse
These current generation Sidewinders have a common issue for certain users: The ribbon on the X gantry fails after much use or not quite perfect assembly , due to the flex of the ribbon as the carriage moves back and forth, putting a twist or strain on where the ribbon is seated into the connector. This Artillery Sidewinder X1 X Cover with Ribbon Clamp should take the strain off that flex point. New Clamp piece with Strain-Reducing Flange at no additional cost!!! STRONGLY RECOMMENDED: A. Inspect and smooth the mating surface of the two parts, Particularly what will contact the ribbon cable. B. Coat the two surfaces or ribbon surface that will be clamped with a layer or Gaffer tape, electric tape or duct tape to cushion the thin ribbon in the clamping zone, and.. C. DON'T OVERTIGHTEN. Don't pinch the ribbon, snug assembly of the two parts is sufficient. Ganked from designs by Venegade and AncientWolf. Mashup and flange by me.
With this file you will be able to print Artillery Sidewinder X1 X Cover with Ribbon Clamp with your 3D printer. Click on the button and save the file on your computer to work, edit or customize your design. You can also find more 3D designs for printers on Artillery Sidewinder X1 X Cover with Ribbon Clamp.